LED Acrylic Headset Standee
If you have any question or doubt regarding any instruction, do not hesitate to contact us.
What's in the box?
Your LED Acrylic Headset Standee comes with:
A) Main acrylic front panel (1)
B) Side panels that form the headset-controller standee (2)
C) Small acrylic support pieces (3)
D) Black LED base with button, support base and USB cable (1)
+ Remote controller (1)
How to assemble the standee
1. All the acrylic pieces come protected with a plastic film. Please remove the plastic film before putting the pieces together.
2. Insert the three acrylic support pieces (C) in the side panel slots (B) like shown on the left picture below.
3. Once these pieces are mounted. Insert the main panel in the slots on the side panels as shown on the right picture below.
4. Insert the acrylic panels into the slot on the base.
5. Plug in the USB to a USB slot, or use a USB adapter to plug the standee to an outlet. Press the button and have fun!
6. You can also use the remote to control the colors, speed and intensitiy of the light.
Sensor and controller settings
Sensor button
Controller settings